Get Email Updates!

Concentration of CO2 in the Atmosphere

The Foam Factor

The dry look. Closed-cell spray foam such as Icynene ProSeal can act as a water-resistant barrier and provide additional “racking” strength vs. high winds. Image: Icynene.

The dry look. Closed-cell spray foam such as Icynene ProSeal can act as a water-resistant barrier and provide additional “racking” strength vs. high winds. Image: Icynene.

After the big one hits, heres how to keep residential flood and water damage to a minimum.

Across the U.S.A. and Canada, heavy rainfall and flooding have caused millions of dollars in damage, lost revenue, damaged crops and homes. Hurricane Harvey ravaged southern Texas and the nation’s fourth largest city, Houston, flooding vast areas of the region—and Hurricane Irma pounded Florida, Puerto Rico and much of the Caribbean with high winds and a downpour. In British Columbia, a tough spell of raging wildfires over the summer made heavy rainfalls a greater threat in fall.

Water ingress resulting from storm surges, high rainfalls and flooding can cause massive damage to the typical home. When water ingress occurs from extreme weather events, it becomes necessary to assess the extent of damage and contamination, debris removal requirements, and how to reconstruct or repair to reduce probability of similar damage in the future.

Power cells

When seeking methods to reduce the risk of water ingress, spray foam insulation is often overlooked as a comprehensive solution that can help play a role to keep out moisture and deter flood damage. However, spray foam insulation can be a key component in the design of building assemblies against future disaster-driven damage. Both open-cell and closed-cell spray foam insulation can be used throughout a residential or commercial structure to manage and minimize moisture ingress.

When it comes to addressing moisture, open cell foam is better suited for use against building materials that can be damaged by water buildup.

When applied against these types of materials (e.g., exterior wood sheathing), particularly in hot or humid climates, insulation should allow just enough moisture diffusion to occur to let adjacent building materials breathe, preventing moisture entrapment.

Open-cell foam delivers this “breathability” and allows building materials to dry, minimizing moisture buildup and related problems, such as mold.

For example, in scenarios where the foam is applied to the underside of a roof deck, in the event of a roof leak water drains straight through the insulation by gravity rather than being trapped against the roof sheathing where it could contribute to roof rot. Upon drying, some open-cell spray foam insulation products return to their original state without warping or distortion, and the effectiveness of the insulation is restored to its original performance potential.

The Federal Emergency Management Agency (FEMA) has identified closed-cell spray foam as a flood-resistant material due to its resilience and strength. According to the government agency, flood-resistant material is any building material capable of withstanding direct and prolonged contact with floodwaters without sustaining significant damage. Closed-cell spray foam, like Icynene ProSea, can be used as a water- resistant barrier to help deflect moisture and provide additional “racking” strength to help resist the high winds of a storm or hurricane.

Dealing with floodings aftermath

When assessing flood damage, one must almost always assume that the water contains contaminants, such as decaying organic matter and debris, raw sewage, fuel, solvents, microbes and mold. Through wicking, moisture and contaminants can be drawn into areas above the actual flood level. Even after cleanup, homeowners may still notice problems with housing elements, since mold and other contaminants can be present due to wicking and therefore may render homes unlivable.

Cleaning up after a flood should involve an assessment of the extent of removals required, necessary cleaning, drying and disinfecting of surfaces by a qualified contractor. Some porous materials may take days or even weeks to carry out. Mold can begin to thrive in as little as forty-eight hours when contaminated water floods an assembly. This makes it likely that many porous materials will, in fact, require removal after an extreme weather event.

Repair work following water ingress or flooding will often involve raising older buildings and constructing new ones on piers or platforms above the Base Flood Elevation (BFE). Construction below the BFE must be done with flood-resistant materials. Closed-cell spray foam insulation is suitable for application below the BFE.

Above the BFE, both open-cell and closed-cell spray foams can be used, but consideration has to be given to avoiding other porous materials that can absorb contaminated water. The choice of materials should be made based on sound building-science principles. For instance, in a floor above a damp crawlspace, it may be desirable to use closed-cell foam because of its vapor retarding, compressive strength and water-resistant characteristics. A qualified and experienced insulation contractor is able to help work through the best approach.

Most of all, building materials exposed to flooding must be resilient enough to sustain a certain amount of water exposure to avoid the need for complete replacement. A “repair and prepare” approach using spray foam insulation can help reduce risk of water ingress and damage, as weather patterns across North America continue to change and challenge our approach in designing and building sound, solid structures to live, work and play in.

Reprinted with permission from Green Builder Magazine, January-February 2018 issue.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>